Finn Power C6 hydraulic turret punch press

• pressure: 300 kN

• amount of stations in the turret: 20, including 9 index station and 1 Multitool station (1xMT10-16)

• tool’s maximum diameter: 88,9 mm (D size)

• punching area without repositioning: 3048 mm x 1524 mm

• 4 programmable clamps of machined sheet with PCS system (programming, automatic clamps’ positioning)

• Siemens Sinumerik 840D steering

• thrust vent for details (max. 500x500 mm)

• travelling speed: 150 m/min.

• punching speed: 1100 strokes/1 min (3000 strokes/ 1 min. at marking)

• threading ability: from M2,5 to M8

• ability of working with rolling and wheel tools

• machined sheet’s automatic lubrication system

• tools’ automatic lubrication system

• CAM software: NC Express and Metalix cncKad v8.0

Finn Power C5 hydraulic turret punch press for sheets

• pressure: 300 kN

• amount of stations in the turret: 20, including
  8 index stations and 2 Multitool stations (1xMT10-16, 1xMT24-8)

• tool’s maximum diameter: 88,9 mm (D size)

• punching area without repositioning: 2530 mm
  x 1270 mm (4000 x 1270 mm with repositioning)

• 3 programmable clamps of machined sheet

• Siemens Sinumerik 840D steering

• thrust vent for details (max. 500x500 mm)

• travelling speed: 108 m/min.

• punching speed: 1100 strokes/1 min (3000 strokes/1 min. at marking)

• threading ability: from M2,5 to M8

• ability of working with rolling and wheel tools

• machined sheet’s automatic lubrication system

• tools’ automatic lubrication system

• CAM software: NC Express and Metalix cncKad v8.0

PThe project is co-financed by

EUROPEAN UNION

European Regional Development Fund

MURATA TURRENT PUNCH PRESS

• thickness of machined material: 6 mm

• punching area: 1250 mm x 200 mm (1500 mm x 4000 mm with interception and rotation)

• pressure: 300 kN

• amount of stations in the turret: 34, including
  4 index stations and 1 Multitool station

• Fanuc OOPi steering