• Maximum length of bending line: 2150 mm
• Minimum bending length (between side bending): 350 mm
• Minimum width (between side bending): 160 mm
• Length of bent detail (min. / max.): 350 / 2450 mm
• Width of bent detail (min. / max.): 180 / 1500 mm
• Detail’s maximum diagonal: 3000 mm
• Maximum bending height: 200 mm
• Maximum returning (negative) bending: 200 mm
• Maximum thickness of bent sheet: ST 37 steel (max) 2,5 mm
• Stainless steel (max) 1,8 mm
• Aluminium (max) 3,5 mm
• Sheet’s minimum thickness: 0,5 mm
• Minimum external radius of bent detail

1.5…2 x sheet’s thickness

• Maximum bending angle: 135°/+135°
• Unlimited number of bending
  NC Steering: Siemens Sinumeric 840D NC

Equipment:

ATC – Automatic Tools Change – TCS Version

ATCenables automatic change of the upper tool that allows automatic operation during long period of time. This function also enables machine’s automatic reorientation during bending cycle.

CLL for ATC – reverse bending sequence

In the standard bending cycle, detail’s short sides are bent as the first ones, while longer sides are bent subsequently. CLL is able to reverse this sequence and start bending procedure from the longer side. CLL operates through creation of two gaps in the upper tool. These slits might be symmetrical or asymmetrical depending on needs and element’s complication level.

ASP 2 - 2 dodatkowe, krótkie ostrza gnące (2 niezależnie programowane osie)

ASP2 – 2 additional, short bending blades (2 individually programmed axes) ASP enables easy assembly of special tools demanded for special production process. The so-called “short bending blades” might come useful while bending details that demand partial bending, not necessarily in the same bending line. Using this options we can perform both negative bending (downwards) and positive bending (upwards). ASP may be activated automatically or deactivated during bending cycle. Positioning is executed by programmed axes.

CNC IEU – integrated engraving unit

Integrated Engraving Unit is a tool constructed as a forming roll. It is used for execution of a groove (cutting) in the metal sheet in order to facilitate subsequent bending operations along the cut line. IEU comes very useful while bending closed profiles. AUT – Additional Upper Tool. AUT changes upper tool by lowering additional special tool below standard segments of upper tools. AUT is essential when a line of negative bending that must be accomplished is covered by previously bent profile. This option is also helpful for executing components that demand bending of long radii or for closed profiles.

The project is co-financed by

EUROPEAN UNION

European Regional Development Fund

• pressure: 1500 kN
• maximum bending length: 3150 mm
• CNC steering, 3 programmable axes

EHT BENDING BRAKE

• pressure: 1500 kN
• maximum bending length: 3500 mm
• CNC steering
• 9 programmable axes
• maximum bending length: 3000 mm
• CNC steering

DURMA AD-S 2060 bending brake

• Pressure: 60 t
• Bending length: 2050 mm
• CNC CYBELEC ModEva 10S steering with graphics
• 4 programmable axes

The project is co-financed by

EUROPEAN UNION

European Regional Development Fund

FASTI SHEET ANGLE BENDING MACHINE

• bending length: 2500 mm
• CNC steering
• stop-measuring gears’ programming range: up to 3000 mm